Event date & time:
08.02.2025 at 23:59
Losing suction is probably the most common problem you have to deal with when you own a vacuum cleaner. This happens to even link The Best Vacuum Cleaner . Sometimes, all you need to do is clean a dirty component, but you may also need to replace a part completely.
Follow these steps to find out the reason why your machine doesn't work properly.
Check the filter
The number one culprit of a drop in suction power is a dirty filtration system. Dirt and hair may accumulate in the airflow and cause the filters to clog. In extreme cases, your vacuum may become overheated and shut off automatically.
The general advice is to make sure that you check your filters regularly and wash or replace them when necessary. This depends on whether those filters are washable or not.
Follow the instructions in the manufacturer’s manual if you don't know how to replace the filters in your model.
Check the brush height
Getting the right height of brush roll on each type of flooring is a must if you want to clean with your vacuum in the most efficient way.
For example, when the bristles are not close enough to the bare floors, your machine can't pick up debris as effectively as it's supposed to do. But when you reduce this height too much, the rotating brush may damage certain kinds of floors.
Empty the dust bag or canister
This is another reason your vacuum cleaner might be losing suction. Don't wait for the bag or canister to be full to empty or replace it. The right time to do so is when the dirt and debris have taken up 2/3 of its capacity.
Buy plenty of new bags and replace them regularly if you have a bagged vacuum. If your machine is a bagless model, empty and clean it before you put it back in storage.
Remember to clean the canister in canister vacuums with water and soap and let it dry completely. This also helps get rid of all the unwanted smells on your vacuum.
Check the hose
Many things can get clogged in a vacuum cleaner's hose: crumbs, pet hair, and even a pen. A clogged hose is also one of the most common reasons why you don't get the cleaning performance you want.
The best tool to deal with it is a broom: you can use its handle to break any items inside a clogged hose.
Soapy water is another neat trick. You can leave the hose in warm water all day before letting it dry. The water and dish soap can get all the nasty stuff â even goo and grease â out of it.
Check for any damaged parts
When your vacuum doesn't have the proper seal that it needs, losing suction is an inevitable outcome.
The most common reason for this phenomenon is when you get holes in the hose. If this is the case, it's time to buy a new one and replace it. Good vacuum brands will provide you quality official replacement parts, which you can find easily on their websites.
Check the beater brush
In a vacuum cleaner, the beater brush is the rotating brush at the bottom that picks up the dust from your carpets and floors. If it's not working properly, the machine won't collect as much dust and other types of debris as it should be doing.
The simplest way to see if the beater brush is still working is to flip and turn on the vacuum. It should be rotating with ease. If this is not the case, there are likely some potential reasons, such as hair or a broken belt.
You can fix the suction and improve the performance of a vacuum, even on the link Top best vacuum cleaners on the market, with the simple steps listed above.
If you have restored your vacuum to its original suction after following our guide, please share your experience with other readers as well in the comment section.
What Are The Criteria Used To Choose A Suitable Vacuum Cleaner For Your Home
Reasons TO and NOT TO Buy Cheap Vacuum Cleaners
Eufy RoboVac 11S Review: A Simple Alternative Solution
The iRobot Roomba i7+ Review: A Smart Machine for Your Boring Chores
Dyson V10 Performance Review: How This Incredible Machine Works